DOWNLOADS

MEMBER’S ONLY DOWNLOADER

A Windows application that gives Members in good standing access to System Updates, Imaging Utilities, Firmware Packages, fixture libraries, and license files. Can be run on any PC running Windows 7 or later or a BlackTrax Server running the February 2016 image or later. 

Device Manager

This tool can be installed on BlackTrax Servers or your personal Windows machine. This tool allows you to communicate to Charging Stations, Sync Docks, Beacons, Mini Beacons, TimeKeepers, and Routers to program settings such as wireless channel, IDs, and brightness settings. If running on a BTServer, Device Manager will communicate to the main software to share Trackable and Beacon information.

Download Device Manager   |  Release Notes

RTTrP Reader

This tool can be installed on BlackTrax Servers or your personal Windows machine. This tool allows you to read and verify RTTrP data, as well as as sACN and ArtNet packets when troubleshooting network connections.

Download RTTrP Reader

System Update Release Notes

This release is supported on all BTServers. It includes BlackTrax System Update v2.5.2 and updates all third-party programs.

 

Release Notes for Server Imaging Utility November 2021

Nov 12th, 2021

This release brings QOL updates and bug fixes, especially concerning the continued preview of the integrated Motive experience. This release also brings BTWYG up to date and improvements to our software licensing system.

 

Release Notes for 2.5.2

November 12th, 2021

This release is supported on the new BTServer 2.0 (Rev 7). It includes BlackTrax System Update v2.5.1 BETA pre-installed and an installer to revert to BlackTrax System Update v2.4.3 if desired.

 

Release Notes for Server Imaging Utility July 2021

July 23rd, 2021

In addition to the continuation of the early preview of the Motive Integration, this release is a recommended update for anyone currently running v2.5.0 BETA because of the included bug fixes.

NOTE: You must upgrade your server to Server Imaging Utility February 2021 in order to run this version.

Release Notes for 2.5.1 BETA

June 3rd, 2021

This release is supported on the new BTServer 2.0 (Rev 5 and Rev 6) as well as the older Rev 3 and Rev 4 servers. It includes BlackTrax System Update v2.5.0 BETA pre-installed as well as an installer to revert back to BlackTrax System Update v2.4.3.

This image is required in order to run BlackTrax System Update v2.5.0 BETA.

Release Notes for Server Imaging Utility February 2021

Feb. 4, 2021

BlackTrax is now a 64-bit application! All BlackTrax modules and BTWYG (upgraded to R45) are 64-bit compatible. This release also brings an early preview of the Motive integration. It is possible to track Beacons and manage Sensors all within BlackTrax via the new Sensor Calibration View. Additional features include Sensors Groups to help organize Sensors and get alerts when Sensors drop out or are missing. This is the first phase in a multi-phase release cycle, with more features being added in future releases.

Enable this feature from System Configuration -> Sensors, disable Legacy Mode, and reboot BlackTrax.

NOTE: You must upgrade your server to Server Imaging Utility February 2021 in order to run this version.

NOTE: This version is required to use the Slim X13 Sensors.

Release Notes for 2.5.0 BETA

Feb. 4, 2021

In addition to security improvements, this version also adds an auto-apply feature that will automatically Apply Changes when BlackTrax boots up if all BTEngine modules are connected.

Release Notes for 2.4.3

Jul. 9, 2020

This release is supported on the new BTServer 2.0 (Rev 5 and Rev 6). It includes BlackTrax System Update v2.4.2 and updates all third party programs to the latest versions.

Release Notes for Server Imaging Utility February 2020

Feb. 27, 2020

The big new feature in this release is native control over conventional lighting fixtures. Fixtures without pan and tilt can now be controlled and used with features such as Zones. In addition a static beam size can be used (for Fixtures without automated beam options) so features such as Dynamic Beam Zones can be used with static fixtures. In addition to QOL updates and several bug fixes, this version also changes the way Zones are sent over RTTrPM to be more consistent with the rest of the protocol.

Release Notes for 2.4.2

Feb. 27, 2020

Several bug fixes from v2.4.0 and some new features. Zones over RTTrPM, multi-Chapter selection, and a new border around Beacons to clearly show visible status are all included in this release.

Release Notes for 2.4.1 Release Candidate

Sep. 18, 2019

Chapter Timings and Fading, Pan-Flip Dimming, Device Manager integration, and several workflow improvements are included in this release. To have Device Manager communicate with the Main GUI, please ensure you are running Device Manager v2.4.0 or higher and be on the same machine.

Release Notes for 2.4.0 BETA

Jun. 28, 2019

This release is supported on the new BTServer 2.0 (Rev 5) model, BTServer Rev 4, and BTServer Rev 3. It includes BlackTrax System Update v2.3.6 and fixes certain third party programs from being blocked.

BTServer Rev 3 also has been updated with all changes since October 2017 including Portfolio support.

Release Notes for Server Imaging Utility May 2019

May 16, 2019

Trackables are now sent over RTTrPM to third parties and BTWYG has been updated to WYSIWYG R42 Update 1.

Release Notes for 2.3.6

May. 6, 2019

This release is supported on the new BTServer 2.0 (Rev 5) model. It includes BlackTrax System Update v2.3.5.

Release Notes for Server Imaging Utility January 2019

Jan. 24, 2019

Bug fixes and improvements based on customer feedback.

Release Notes for 2.3.5

Jan. 18, 2019

This release is supported on both the new BTServer 2.0 (Rev 5) model and the BTServer Rev 4 model. It includes BlackTrax System Update v2.3.4 and support for the new Portfolio feature. The Portfolio folder is now shared between the main and backup servers as opposed to the BlackTrax folder and is supported in the new Server Manager.

Release Notes for Server Imaging Utility December 2018

Dec. 7, 2018

BlackTrax System Update v2.3.4 is mostly bug fixes and performance improvements over v2.3.3 RC. There are a few BTWYG enchantments, including a more standard approach to moving the 3D camera that follows other 3D applications as well as having the BTX Panel save its configuration.

Release Notes for 2.3.4

Dec. 7, 2018

This release is specific for the new BTServer 2.0 (Rev 5) model. It includes driver and network configuration support for the new server, as well as Windows 10 LTSB 2016 as the Operating System. BlackTrax System Update v2.2.4 is included in this image.

Release Notes for Server Imaging Utility November 2018

Nov. 12, 2018

BlackTrax System Update v2.3.3 RC brings together a year of custom development, BETA testing, and new features. Any customer running any previous version of BlackTrax can upgrade to v2.3.3 RC and benefit from all previous features. Highlights include an all-new active point cloud engine for more accurate tracking, continuous calibration, RTTrPM precision restriction, IP change detection for outputs, BTWYG R41 Update 1, and several bug fixes.

Release Notes for 2.3.3 Release Candidate

Oct. 5, 2018

BlackTrax System Update v2.2.4 is included in this image.

Release Notes for Server Imaging Utility September 2018

Aug. 31, 2018

2.2.4 has several bug fixes and a new licensing system that allows new customers to purchase a reduced version of BlackTrax with limited outputs. All existing customers have an unlimited license, but be sure to upgrade your license file from the Member’s Only Downloader before upgrading to this release.

Release Notes for 2.2.4

Aug. 31, 2018

2.3.2 Update 1 BETA includes BTWYG based off of R40 Update 1. This brings improvements such as PSN 2.0 and RTTrPM motion inputs into BTWYG as well as several improvements to DWG importing and CAD performance. For a full list of changes, check out the WYSIWYG R40 Update 1 Release Notes.

Release Notes for 2.3.2 Update 1 BETA

May. 4, 2018

2.3.2 BETA brings several refinements and bug fixes to Portfolio Manager and adds an all new animated splash screen. Pan-Flip timing is also included in this release, which allows you to slow down the speed of a pan flip (up to 10 seconds) during Fixture Calibration. This is designed to combat fixtures that are hung from unstable lighting positions, where a normal (fast) pan-flip would cause the position to shake (like a dead hung truss for example).

Release Notes for 2.3.2 BETA

Feb. 2, 2018

In this next version of 2.3, we are adding a long requested feature and a required building block in future features: Portfolio Manager. Portfolios are a collection of projects (BlackTrax and BTWYG) that allow easy linking between files, easy transfer of those files, and allows the addition of features such as autosave, save archiving, and reverting projects which are all in this release.

Release Notes for 2.3.1 BETA

Dec. 15, 2017

An early preview of our next major version of BlackTrax. This version includes Dynamic Zones (the ability to attach a Zone to a Trackable and have the Trackable’s position and orientation update the location of the Zone) and a new troubleshooting tool called System Status so that you may view internal network connections of BTEngine as well as perform latency tests on your RTTrPM outputs.

Release Notes for 2.3.0 BETA

Nov. 17, 2017

BlackTrax System Update v2.2.3 is included in this release in addition to a new Server Manager, Device Manager replacing CSM, native support for 10.x Art-Net networks, and improvements to the imaging process itself.

Release Notes for Server Imaging Utility October 2017

Oct. 13, 2017

BTWYG is now based off of R39 Update 1. In addition, bug fixes for Auto Douse and Zones, and the removal of Pan-Flip Dimming’s disabling option (timing is still available).

Release Notes for 2.2.3

Oct. 13, 2017

Improvements for dynamic decaying of the centroid for Centroid Jump Smoothing, and bug fixes for Auto Douse and Smooth Pickups.

Release Notes for 2.2.2

Sep. 8, 2017

BTWYSIWYG R39 is now included in this release, in addition to bug fixes and improvements to many of the features introduced in v2.2.0. These include Fixture Groups and Importing Outputs as well as improvements to how beam calculations are handled for sizing and Beam Collision Zones.

This version also removes support for Trackable Centroid Type due to lack of use and conflicts with other features.

Release Notes for 2.2.1

Jul. 28, 2017

This version introduces a new smoothed Centroid solver, to gradually fade Centroids when LEDs become hidden instead of snapping between points. LEDs and Centroids are now visible in BTWYG’s LIVE Shaded View so you can easily view groups of Beacons (based on colour) which makes creating and managing Rigid Bodies even easier.

Based on feedback from v2.1, two new features have been added to Output Configuration – Import/Export of the outputs in a project and per Trackable smoothing, so each Beacon can receive a unique smoothing value instead of on a global level.

There are many other features that help improve the daily workflow of BlackTrax including Fixture Groups, adding Output Configuration to the toolbar, and having Messages always appearing on top of other widgets.

Release Notes for 2.2.0 BETA

Jun. 9, 2017

Includes BlackTrax System Update 2.1.3.

Release Notes for Server Imaging Utility March 2017 U1

Mar. 24, 2017

Bug fixes for Monitor and Undo Stack.

Release Notes for 2.1.3

Mar. 24, 2017

Cue-Able Fixture Calibration allowing each project to contain up to 24 different preset positions for each fixture. Each preset can be individually calibrated and recalled on a per chapter basis. In addition, there have been several additional bug fixes for Output Configuration and Monitor.

Release Notes for 2.1.2

Mar. 21, 2017

New Server Manager that combines BTBackup and BlackTrax Profile Manager into a single application. The Server Manager can also display currently installed versions of BlackTrax, easy access to license and configuration folders, and view network card statuses.

In addition, there is an improved installation process that highlights progress more clearly and configuration of the server is now found in a new setup application that runs on the first boot.

Release Notes for Server Imaging Utility March 2017

Mar. 3, 2017

Several bug fixes, focusing mostly on improvements to Output Configuration and BTEngine module syncing. This update also upgrades BTWYG to R38 which includes truss mirroring, importing fixtures from a spreadsheet, auto grouping for fixture groups, library additions, and all other features of regular WYSIWYG R38.

In addition, all new BlackTrax projects and template files include template BTWYG BTX information, meaning users don’t need to import a BTWYG project’s information before using BlackTrax. This will help customers who use BlackTrax primarily for third party use get the system up and running quicker.

Release Notes for 2.1.1 Release Candidate

Mar. 3, 2017

Big updates to the usability of BlackTrax with the removal of Tracker, Follower, and Tracking Adapter’s GUIs. All major functionality is now controlled from the Main GUI and the brand new Output Configuration. Output Configuration is the place to go to create and manage all outputs out of the BlackTrax system with an easy to use interface to get third parties up and running more swiftly.

Two new lighting features have been added to automate fixtures turning on and off based on visible motion: Smooth Pickups and Auto Douse. And lastly, full undo and redo (with logging abilities) are now available in Edit View for all chapter editing operations.

Release Notes for 2.1.0 BETA

Jan. 12, 2017

Fixed a bug that would slow BTWYG’s LIVE view down to 1FPS in some situations.

Release Notes for 2.0.5.Patch 1

Dec. 7, 2016

As of v2.0.5, the BlackTrax software downloads are for Members in good standing only. Please download the ‘BlackTrax Member’s Only Downloader’ to verify your membership and access the software. You will need at least your BTX Dongle code for this process.

As part of this release, all Motive settings will be reset with the newly installed BlackTrax settings.

Motive now prompts to install an optional third party software called NI-DAQ. This is not required for BlackTrax use and can be ignored.

IMPORTANT: This release requires a BTServer running version July 2016 or later. Legacy servers (Windows 7) and servers with versions prior to July 2016 must download the latest BlackTrax Server Imaging Utility (which includes 2.0.5) instead of this download. Both are accessible from the Member’s Only Downloader.

Release Notes for 2.0.5

Aug, 26. 2016

This is the first release of the Server Imaging Utility. The first released version of the new server image has been shipping on servers since February 2016, however this is the tool that can deploy the image outside of CAST. Each release contains the tool and the image itself. You may use this tool to re-image servers with the same Server OS version, or upgrade a legacy server to the latest server release. Please refer to the information provided in the BlackTrax Member’s Only Downloader for compatibility information as not all BTServers will be compatible with this tool.

Release Notes for Server Imaging Utility August 2016

Jul. 16, 2016

When upgrading from any previous version of BlackTrax (including the BETAs), all application settings will be re-set to defaults – If you changed any default settings please verify each application to ensure your system is still configured correctly (this includes Tracker’s beacon list).

There is a new licensing security system used to authorize hardware devices with the BTServer. Please be sure to download the required license files.

IMPORTANT: We have now enabled the security system, which means if an invalid license is detected the system will no longer receive position information until a valid license is updated.

Release Notes for 2.0.4

Jul, 16. 2016

We have now entered Release Candidate, so although more stable than the BETAs, please be mindful of any possible bugs and unexpected behavior. Please report all bugs to support@blacktrax.ca.

Release Notes 2.0.3 Release Candidate

Jun, 11. 2016

IMPORTANT: When updating to BlackTrax v2.0.2 from 1.x, you must first uninstall BlackTrax v1.x before installing v2.0.2. This can be done with the v1.x installer; once run it will prompt you to remove BlackTrax. Follow the steps to remove BlackTrax, then you may continue to install v2.0.2 as per normal. As BlackTrax will be installing new, please ensure the installer installs for all users on the machine.

Release Notes for 2.0.2 Beta

Mar. 31, 2016

When updating to BlackTrax v2.0.1 Patch 1 from 1.x, you must first uninstall BlackTrax v1.x before installing v2.0.1 Patch 1. This can be done with the v1.x installer; once run it will prompt you to remove BlackTrax. Follow the steps to remove BlackTrax, then copy the new installer into the Installation Management folder and upgrade as per normal. As BlackTrax will be installing new, please ensure the installer installs for all users on the machine.

Release Notes for 2.0.1 Patch 1 Beta

Feb. 5, 2016

When updating to BlackTrax v2.0.1 from 1.x, you must first uninstall BlackTrax v1.x before installing v2.0.1. This can be done with the v1.x installer; once run it will prompt you to remove BlackTrax. Follow the steps to remove BlackTrax, then copy the new installer into the Installation Management folder and upgrade as per normal. As BlackTrax will be installing new, please ensure the installer installs for all users on the machine.

Release Notes for 2.0.1 Beta

Jan. 30, 2016

When updating to BlackTrax v2.0.0 from 1.x, you must first uninstall BlackTrax v1.x before installing v2.0.0. This can be done with the v1.x installer; once run it will prompt you to remove BlackTrax. Follow the steps to remove BlackTrax, then copy the new installer into the Installation Management folder and upgrade as per normal. As BlackTrax will be installing new, please ensure the installer installs for all users on the machine.

Release Notes 2.0.0 Beta

Dec. 19, 2015

There is a new licensing security system used to authorize hardware devices with the BTServer. Please be sure to download the required license files. Note that for this release, your system will only warn you if your license is invalid, but will not prevent access to any features or functionally.

Release Notes for 1.8.9

Nov, 12. 2015

In order to install BTWYG R35, you must first uninstall BTWYG R32 using BTWYG R32’s installer, not BTWYG R35’s installer as stated in the document ‘Server Update Instructions’.

Release Notes for 1.8.8

Sep. 18, 2015

Motive update to address USB dongle driver issues.

There is an updated version of Motive as part of this release that is labeled ‘Beta’ in the about page; please note that all BlackTrax-Motive functionality has been tested and verified, but please report any issues you encounter.

The Residual setting in Motive is now changed to radius instead of diameter. This means that the residual should typically be half of what it was previously.

Release Notes for 1.8.7 Patch 1

There is a new module called Cue, existing customers may require CAST to activate the new module on your server in order to start using it.

There is an updated version of Motive as part of this release that is labeled ‘Beta’ in the about page; please note that all BlackTrax-Motive functionality has been tested and verified, but please report any issues you encounter.

The Residual setting in Motive is now changed to radius instead of diameter. This means that the residual should typically be half of what it was previously.

Release Notes for 1.8.7 

Bug fixes. Downloading installations has changed from ‘Primary’ and ‘Secondary’ downloads to ‘Update Package’ and ‘Complete Package’. A Complete Package includes all installers for BlackTrax, BTWYG, and Motive. An Update Package only includes the installers for the programs that were updated since the last release.

Release Notes for 1.8.6

Motive has changed their coordinate system from a left hand coordinate to a right hand coordinate system. BlackTrax will convert the coordinate system automatically back to a left hand coordinate system for use with third party clients to maintain system compatibility. No change should be noticed, and you may set the ground plane in the same orientation as before. We still ask however that you please verify all connecting technologies to BlackTrax (lighting, multimedia, etc) due to this change.

Release Notes for 1.8.5

Motive has changed their coordinate system from a left hand coordinate to a right hand coordinate system. BlackTrax will convert the coordinate system automatically back to a left hand coordinate system for use with third party clients to maintain system compatibility. No change should be noticed, and you may set the ground plane in the same orientation as before. We still ask however that you please verify all connecting technologies to BlackTrax (lighting, multimedia, etc) due to this change.

Release Notes for 1.8.4

This is a patch to 1.8.3 that fixes a crash when the user right clicks a calibration point in Calibration Mode. 1.8.3 is not required to update to this patch, this may be upgraded from an earlier version of BlackTrax as well.

Release Notes for 1.8.3 Patch 1

This is the final release of BlackTrax version 1.5. This version addresses several bugs and usability concerns as well as adding some polish to existing features. We are currently in the process of personally updating our users to the latest server management policy (which allows our users to update BlackTrax themselves), which means CAST will be involved in helping our users to update to this release. After all users are updated, we will post the final version here as well as all future versions of BlackTrax.

Release Notes for 1.8.3

keyboard_arrow_up